„Was ist dieses Beizen?“ Hast du dich das auch schon gefragt? Wenn du vom Beizen nur eine vage Vorstellung hast, dann weißt du wahrscheinlich schon, dass es “irgendwie ziemlich wichtig” ist. Ist Beizen ein Thema, vor dem du Respekt hast, oder das dich sogar vom Färben mit Pflanzen abgehalten hat? Nach diesem Artikel fühlst du dich damit sicherer.
Die Beizen ermöglichen, pflanzliche Farben zu “fixieren” – ich nenne es ungern so, denn das Wort verkürzt ziemlich, dafür kann man sich aber direkt was darunter vorstellen. Das Beizen ist wichtig für gut haltbare Pflanzenfarben, und es erfordert auch ein bisschen Präzision. Aber wenn du es einmal verstanden hast, kannst du es wirklich ohne Probleme selber machen!
Vinegar is not a mordant
I was told the following in a workshop several times: First attempts at dyeing did not work out at all, although instructions for dyeing were followed. And then it turned out, these instructions named vinegar as a mordant, for example, or baking powder, and one or both of these should have fixed the dye. Just to be safe: Please do not try at home!
How plant dyes attach to fibres
To start at the very beginning - lots of the natural dyes are so-called "adjective" dyes *. Simply put, this means that they cannot bond directly to the textile fiber (i.e. the fabric or yarn that you want to dye). You need something to “add”, so to speak, an "agent" that can bond with the fiber. This agent (figuratively I imagine it as a bridge) is the mordant: it bonds with both the textile and the dye. This is simplified – but it helps me to understand how it all works.
* In addition to these adjective mordant dyes, there are also some “substantive” dyes. They can also connect to a fiber without a mordant.
The function of the mordant
For one, pre-mordanted fibers, whether fabric or yarn, take to the dye better (or at all) when dyed with plants. Apart from that, the colour fastness of the dyes is better, especially in the long term. (Besides, the second important factor for colour fastness is the plant chosen, because different plant dyes have very different properties. But that's another topic.)
The function of the mordant is to enable a stable bond between textile and dye. The type of mordant you choose also has an impact on the resulting colour. It can make a big difference, between lemon yellow and dark gray!
Mordants are metal salts
When we speak of mordanting in plant dyeing , we refer to certain salts of different metals - but not the table salt from the kitchen, sodium chloride. Vinegar mentioned above is not a metal salt, so you can see why it won't work as a mordant. Vinegar (and baking soda f.ex.) can shift plant dyes (with some colors even very radically), but this is due to the change in the pH value and does not improve the color fastness of plant dyes.
For environmental and health reasons, salts of aluminum and iron are probably most relevant for you and me.
If you read in old(er) dye books, you will also find recipes with other metal salts, for example chrome or lead. Today they are not used at all in house dyeing (anymore). Even if you limit yourself to the two above-mentioned mordants, you can achieve a wide range of colors and don't miss out on colourfastness!
Safety in mordanting
I recommend that you stick to a few rules when dealing with mordants right from the start - so you and everyone in your household are always safe around them. By and large, stick to the same rules for dyeing with plants in general.
Pots and spoons that are used for mordanting are no longer to be used for food. If you're just starting out, a single pot will do. You might find one (made of stainless steel or enamel) at the flea market. And if you also have two 10 liter buckets to “park” liquids, that should be fine to get started.
If you are heating mordant baths, be sure to ventilate your work area well when you cannot work outside. Wear rubber gloves when measuring mordant salts or stirring your mordant bath. Not because the mordant would be "damaging" your skin right away, but because the skin can absorb substances - just suppose you want to continue mordanting and dyeing with plants for the next four decades, and hot mordants could possibly accumulate by not weearing gloves... Label the mordant/mordant baths clearly and do not leave them open and children or pets unattended with them.
Some mordants or additives are very fine powders - before you dissolve them in water, wear respiratory protection lika a dust mask during processing and, if necessary, protective goggles.
I don't intend to scare anyone or sound alarmist, but I go with better safe than sorry with mordants. The mask may be a nuisance at first - but in the end you only wear it when weighing and stirring in, so really only for a short while. (And by now we all are a lot more used to them, probably...)
Aluminum salts: Alum and "cold mordant"
There are mainly two or three different forms of aluminum that most dyers use here. Alum, the crystals of which look similar to sugar (potassium aluminum sulfate); Aluminum acetate, which as far as I know, cannot be bought in ready to use in Germany; and aluminum triformate, a very fine powder (wear a mask), often called "Kaltbeize" or "cold mordant".
Which one you use is a bit of personal preference, or maybe one of the mordants is more easily available for you. In the studio, the aluminum triformate is my favorite mordant. But whenever I work from home, I mostly use alum. I like that it isn't as fine a powder and a bit easier to handle. There are different recipes for all these aluminum mordants, some of which are “optimized” for different fibers. Don't be confused when you get a recipe recommended and then find another. There are a number of ways to succesful mordanting. (As long as you avoid instructions indicating vinegar as a proper mordant...) Choose the method that best suits you and your workshop situation/apartment. I go through my favourite mordants all workshops and in the Online workshop.
Mordanting with iron
Iron can be bought as ferrous sulfate in crystal form, or you can make a home made iron solution (ferrous acetate). To make this, cover iron bits (such as rusty nails or steel wool), vinegar essence and a little water, and then wait until it changes - the solution will become rusty orange (sometimes blackish).
I prefer this home made version to ferrous sulphate. To use it as a mordant (I love to use it as a post-mordant), make sure to dilute (a lot) and soak your textile in it or add to dye baths.
Iron in particular can make fibers fragile and break down if you use too much of it. So make sure to not apply ferrous acetate undiluted. This property of iron is also the reason why I rarely use it as a pre-mordant, but rather carefully dosed after dyeing.
In general: If you buy a mordant somewhere, maybe one that is all new to you, pay attention to the safety instructions provided. They are a good reminder of what to look out for when handling the material.
The topic is so big that more articles are sure to follow. Do you have any questions or wishes for it?
For German readers I linked to a video about aluminum salts (in deodorants) by MaiLab, and whether or not they are safe to use.
PS. All information has been researched to the best of my knowledge and belief, but errors may occur. Please also inform yourself about the substances you use in dyeing. Pay attention to the correct handling of metal salts and do not work with substances you are unfamiliar with. I am not liable for any negative outcome.